Announcement

Collapse
No announcement yet.

Details of ships and boats

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ombugge
    replied
    Re: Details of ships and boats

    GMDSS Console:


    Bridge wing control positions:


    This vessel is expected to be ready for delivery by end of May.

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    Aft controls:

    The Chairs has not been installed yet.

    Winch control panel:

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    Up to the Bridge.
    View of the deck from the Bridge:


    Fwrd. controls:

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    Two deck cranes, 25 m.t. SWL:

    A sister ship is tied up alongside.

    One of two FiFi Pumps:

    The pumps are attached to the Main Engine front PTO. (FiFi 2 Class)

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    One of two Tuggers:

    25 m.t. pull.

    One of 4 Capstans:

    15 m.t. pull

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    Local control for one of the lower drums:

    Chain lifter for 76 mm. diam. chain attached to the drive shaft.

    One of four hydraulic drive motors:
    Last edited by ombugge; April 12th, 2012, 17:06.

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    The winch has a capacity of 500 m.t. pull on all three drums.
    The Main drum can hold 6100 m. of 76 mm. diam. wire:

    Just for scale

    One of two Storage Drums:

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    The superstructure and winch house:

    I can assure you, it is a long climb from the deck to the bridge.

    A closer look inside the Winch house:

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    It's been a long time since I posted anything in this thread, but here is a newbuilt AHTS still being fitted out at Batam.
    21,000 Bhp and estimate 250 m.t. Bollard Pull. (Yet to be tested)

    I didn't get a good external shot, but here is an identical sister ship seen at the same yard May last year:

    The main difference is the Offshore crane, which is missing on this one.
    Last edited by ombugge; April 12th, 2012, 16:59.

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    Originally posted by janihudi View Post
    thanks for this report ombugge,
    but i wonder;
    you are checking vessel out for transportarion and insurance,
    making images of that what cabn be use when something happen.
    do you not get any problems for placing them here,i mean not every shipowner wants that the whole world to know what the situation is onboard,speccially when its bad.
    So far I have not had any complains. Maybe CVF isn't so widely read as we think?

    new build vessel owners don't want that complicated or total new machinery is to found on the net taken by someone who was on board, and what whad to be topsecret
    Sophistication??? You mean those in post # 82???

    Jokes aside, I have given that some thought. I try to avoid posting anything that may get me into trouble on the "negative" side. There isn't any "Top Secret" equipment on any vessel I get to visit, or have any dealings with. The one exception was a Submarine, but I was not allowed on board, or to take any pictures from the outside. (I don't think I would have been able to get in through the hatch on that Sub anyhow)
    Last edited by ombugge; December 6th, 2011, 12:39.

    Leave a comment:


  • pilotdane
    replied
    Re: Details of ships and boats

    Originally posted by ombugge View Post
    I am glad it was fire hose test. I thought he had too much to drink and could not wait to get to the head.


    Again, thank you for the detail photos. I especially liked the nice and clean engine room.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Details of ships and boats

    Originally posted by ombugge View Post
    More sophisticated equipment:

    The other half of the fire bucket is on the opposite side.

    When you see electric fitting packed up in plastic, you know they are of high quality:
    That´s my lough of the day. :-)

    Your "walk arounds" are so wonderful. Please don´nt stop.

    Matthias

    Leave a comment:


  • janihudi
    replied
    Re: Details of ships and boats

    thanks for this report ombugge,
    but i wonder;
    you are checking vessel out for transportarion and insurance,
    making images of that what cabn be use when something happen.
    do you not get any problems for placing them here,i mean not every shipowner wants that the whole world to know what the situation is onboard,speccially when its bad.
    new build vessel owners don't want that complicated or total new machinery is to found on the net taken by someone who was on board,and what whad to be topsecret

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    The Oily Water Separator looks like something out of a Technical Museum:

    But it function and meet MARPOL requirements.

    At the other end, the Steering Gear:


    Somebody must have had a lot of time on their hand to paint circles around every "finger hole" in the floor plates:

    Colour coded to indicate the function of the valve below. (No computerized remote control here)

    No walk-in Freezer/Chiller here:

    One Household chest freezer for each type product is much easier to manage.

    PS> Some of the pictures are from the identical sister ship.
    Last edited by ombugge; December 4th, 2011, 11:24.

    Leave a comment:


  • ombugge
    replied
    Re: Details of ships and boats

    The Engine Room is quite "roomy":

    There is little else to use the space below deck for.

    The Bow Thruster is direct Diesel driven:

    No need for electric motor and complex variable frequency control here.

    With the exhaust out through the side:

    If a pasty Bow Fender gets in the way, just remove a piece.

    Leave a comment:

Working...
X